karasu 1410g
¥130,000
Maximum dimensions 225mm×89mm×28mm weight 1410g This is a finished whetstone with a karasu pattern from shouhonyama mined in Kyoto. This whetstone is a little softer than the medium one. Moderate polishing power, recommended for finishing knives, etc. It has a cloudy finish.
Yanagiba knife
¥42,000
中屋甚九郎作の別打ち柳刃包丁になります。 在庫品はもうなくこの一品のみの商品になります。 波長: 260mm 全長: 410mm 鋼材: 青紙 ハンドル: 牛水柄
Tsukinowa 2135g
¥98,000
size 207mm×75mm×53mm A rare natural whetstone mined in the Tsukinowa mine near Atago, Kyoto.It's a hard whetstone. Natural whetstones belong to the mirror type category. A natural whetstone recommended for carpentry tools, razors, etc.
Maruka stamp 1070g
¥60,000
size 204mm×80mm×28mm weight 1070g Nakayama Mine, where the Maruka stamp is located. A stone that is harder than medium. Please DM me if you want it.
Ohira suita renge 2510g
¥300,000
This is the finest quality from the Ohira Mine. suita renge A wonderful natural whetstone with high abrasive power. Please consider purchasing as soon as possible as it is no longer in stock. size 219mm×80mm×57mm weight 2510g
suita renge 2445g
¥140,000
If you want to see the sharpening video, please see the Instagram posted on September 3, 2023. Maximum dimension 220mm*81mm*55mm weight 2445g It will be a suita mixed with renge from Ohira Mine. A medium hardness whetstone. Easy to handle, even beginners can sharpen smoothly. High polishing power allows for quick cutting. The line running down the middle is non-toxic. This is the finished image.
Nihonbashi Kiya
¥62,000
SOLD OUT
Nihonbashi Kiya Dimensions: Blade length 169mm Total length 290mm Base metal: Laminated nickel alloy and stainless steel Blade Material: Super Gold Powder Steel Handle material: Cocobolo wood (natural wood) 49-Layer Suminagashi Super Gold Powdered Steel Western Knife A high-class kitchen knife with a sharp forging technique reminiscent of a well-trained Japanese sword and excellent sharpness. The suminagashi pattern on both sides is made by layering nickel alloy and stainless steel and forging it with a special hammer to create a complex pattern with advanced technology. It is tough and retains its beautiful shine. Please appreciate the beauty of the 49-layer rich surface finish. For the material of the blade, we used super gold powder steel manufactured by the powder metallurgy method, which is at the forefront of metal technology. It is a near-ideal knife with excellent long-lasting sharpness and rust resistance compared to carbon steel knives.
tsushima Natural whetstone
¥15,000
I have a lot in stock, so if you want to buy it, please DM me on Instagram. If you find a cheap shop, I will drop the price. About size 210mm×80mm×50mm About weight 2300g *The Tsushima whetstone has finished mining and processing, and is a whetstone that is becoming increasingly rare. It is said to be a medium whetstone with very good sharpening juice, but it can also be used sufficiently for finishing. It is also very compatible with scissors sharpening and kitchen knife sharpening. It is a whetstone comparable to Mikawa as Nagura.
天然砥石 中山 黄板
¥36,000
天然砥石 中山 黄板 仕上砥石 Natural whetstone nakayama kiita Finishing whetstone size 180mm 62mm 33mm weight 845g If you would like to purchase, please DM to Instagram.
High precision iron plate
¥6,200
Please contact us on Instagram if you would like to purchase. Reference plate Base plate Parallel flatness ±0.001mm (±1μ micron) Iron plate Natural whetstone Whetstone Plane Chisel Carpentry tool Kitchen knife Small knife Carving knife Wood carving Sharpening Metal board size 210mm×75mm×15mm weight about 2.0kg Double-sided processing with a precision grinder. We processed a metal plate with parallelism and flatness of ±1μ (microns). (SPHC material) (Surface roughness: about Ra0.8μ) Measurements are taken using a surface plate with a pick test of 1μ. ●Application ・Jig for checking the warpage of blades. ・A jig for checking the flatness of knives, natural whetstones, artificial whetstones, etc. - Back pressing using abrasive paste. ・Attach sandpaper or the like to the base plate to smooth out the surface of the whetstone. In addition, please use it for various purposes. *Since each product is inspected for accuracy, we will accept returns if the flatness is not obtained. * There are nests, scratches, etc. in the material. Please refrain from bidding if you are looking for perfection. * The photo showing the back of the chisel is made by adding diamond paste (oil-based) with abrasive grains of 0.5μ to 3μ, laying paper on this product, and polishing it to a mirror finish. ● Flatness reference value ・Shapton Heals Flatness ±15μ ・Shapton Aircraft Carrier Flatness ±3μ · Inexpensive diamond electrodeposited whetstone sold at home centers Flatness ±100 μ (0.1 mm) *For rust prevention at the time of shipping, we will apply a thin layer of oil before shipping. *Each corner is not chamfered, so be careful not to injure yourself. *Because it is a general steel material, please prevent it from rusting. *Please be careful not to hit it or drop it. It will cause warpage.
for checking the flatness of Yanagiba knives
¥9,800
SOLD OUT
This time, I created a jig for checking flatness such as Yanagiba knife. Flatness will be accurate to ±2 microns. DM me if you are interested. Please use it as a jig for checking the flatness of Yanagiba knives, etc. size About 400mm x 50mm x 50mm weight about 8kg
Shigefusa Deba knife
¥99,999,999
SOLD OUT
Shigefusa Deba knife with box swedish steel Blade length 13.6cm total length 27.5cm Brand new and unused. Since it has been in storage for a long time, there is a little rust, so please check the image. Thank you.
atago suita 700g
¥25,000
SOLD OUT
Natural whetstone atago suita Soft whetstone. Abrasive power is high. size 184mm×66mm×25mm weight 700g
atago shirosuita 713g
¥25,000
Natural whetstone atago shirosuita Soft whetstone. Abrasive power is high. ※ There are cracks. I have a shield. size 186mm×64mm×25mm weight 713g
atago nashiji 680g
¥25,000
Natural whetstone atago nashiji Soft whetstone. Abrasive power is high. size 195mm×70mm×20mm weight 680g
Atago suita 670g
¥25,000
SOLD OUT
Natural whetstone atago suita Soft whetstone. Abrasive power is high. size 180mm×66mm×25mm weight 670g
菖蒲谷 巣板 1400g
¥100,000
天然砥石 京都 正本山 菖蒲谷 巣板 サイズ 204mm×72mm×38mm 重さ 1400g Japanese natural whetstone kyoto shouhonyama shoubudani suita size 204mm×72mm×38mm weight 1400g Hardness level 3.8 A slightly hard whetstone. Fine whetstone with high polishing power. On sale. DM me if you want it.
正本山 浅黄 2145g
¥180,000
Japanese Natural whetstone shouhonyama asagi size 205mm×75mm×51mm weight 2145g Hard whetstone. It is possible to sharpen smoothly by using a diamond electrodeposited whetstone or Nagra.
正本山 蓮華 808g
¥16,000
Japanese natural whetstone shonyama renge finishing whetstone soft whetstone. The sharpening liquid comes out well and is easy to handle even for beginners. It's soft but has a high polishing power. Whetstone size 178mm×61mm×26mm
北山砥石 #8000
¥5,000
If you want to buy it, please DM me directly on Instagram. I need to calculate the shipping cost. Transactions will be made directly through PayPal. The Kitayama #8000 is a highly refined polishing whetstone that outperforms many other pricier whetstones in the same grit range. Many 8000 grit whetstones tend to feel a bit dull, and soft, but this whetstone still retains enough feedback to allow the sharpening to know what is happen with the knife. The mirror-like finish quality is perfect for everyday and high-end commercial kitchen use. Made in Japan
天然砥石 八木ノ島 浅黄
¥22,000
天然砥石 八木ノ島 浅黄 Japanese Natural whetstone yaginoshima asagi size 210mm×80mm×36mm A medium-harder whetstone. Easy to sharpen.
Damascus Print Knife
¥5,000
Damascus Print Knife Dimensions: Blade length 180mm Total length 315mm Steel: 440C high carbon stainless steel Hardness: HRC58-60 Pattern: Turquoise color handle It will be a Damascus print kitchen knife. The steel used is high carbon steel, has a high chromium content, has good sharpness, is resistant to rust, and has excellent corrosion resistance, and is easy to sharpen.
Turquoise knives Santoku knives Beef knives knives
¥4,500
Turquoise knives Santoku knives Beef knives knives ●size: Blade length180mm full length315mm ●Steel material:440C High carbon stainless steel ●Hardness: HRC58-60 ●Pattern: Turquoise color handle It will be a kitchen knife with a turquoise handle. It will be a new and unused item. The steel used is high carbon steel, has a high chromium content, has good sharpness, is resistant to rust, and has excellent corrosion resistance, and is easy to sharpen.
Yaginosima suita asagi
¥28,000
八木ノ嶋 巣板 浅黄 Yaginosima suita asagi If you would like to purchase, please DM to Instagram. size 210mm×76mm×32mm weight 1375g